Production Cable Systems (PCS) logo
← Field notes
Engineering · Jun 26, 2026

Why stranded copper matters for tactical cable

Production cable gets abused in ways most network cable never will.

It gets pulled off carts, dragged across stages, wrapped around truss, coiled at the end of the night, loaded into a truck, and then deployed again the next morning. On a busy show, the same cable may be handled several times in a single day.

That repeated movement matters because one of the biggest differences between tactical Ethernet cable and ordinary installation cable is something you cannot see from the outside: the conductor construction.

For cable that is expected to move, stranded copper matters.

Solid vs. stranded copper

A solid conductor is exactly what it sounds like. Each conductor inside the cable is made from a single piece of copper.

Solid copper is excellent for permanent installations. If you're pulling CAT6A through conduit, terminating it to a patch panel, and expecting it to stay there for the next ten years, solid conductor cable makes perfect sense. It offers consistent electrical performance, terminates cleanly into insulation displacement connectors, and doesn't need to survive constant movement.

The problem starts when you repeatedly flex it.

Every time a solid conductor is bent, the copper experiences mechanical stress. Do it occasionally and it isn't a problem. Do it hundreds or thousands of times in roughly the same area and the conductor begins to work-harden.

Eventually, it can fracture.

That failure may not be dramatic either. The cable can continue working intermittently, pass traffic while sitting still, and then suddenly develop packet loss or lose a pair when it gets bent in a certain direction.

Anyone who has worked with production cable long enough has seen that kind of failure.

Stranded conductors solve a large part of that problem.

Instead of one solid piece of copper, each conductor is made from multiple smaller copper strands twisted together. When the cable bends, those strands are able to move slightly in relation to one another.

The bending stress is distributed across the bundle instead of concentrating on a single solid conductor.

The result is a cable that can tolerate significantly more repeated flexing.

Why that matters in live production

There is a major difference between structured cabling and touring cable.

Structured cabling is installed.

Production cable is handled.

A 100-foot tactical Ethernet cable might be deployed across a stage, pulled back, coiled, moved to another position, redeployed for rehearsal, struck after the show, packed into a road case, transported overnight, and then do the exact same thing the following day.

Multiply that by months or years of use.

This is why simply putting an RJ45 or EtherCON connector on ordinary installation cable does not turn it into tactical cable.

The conductor needs to be designed for movement.

So does everything around it.

What TRUFLEX uses

TRUFLEX uses 24 AWG stranded copper conductors with seven strands per conductor.

That construction gives us the electrical characteristics we want from CAT6A while keeping the cable flexible enough for repeated deployment in live production environments.

The conductor construction is paired with a flexible PUR-style outer jacket rather than treating the jacket as an afterthought.

That combination is intentional.

The copper needs to survive flexing internally, while the jacket needs to remain flexible, resist abrasion, and protect the cable as it moves through the real-world environments production crews put it through.

A cable can have an excellent conductor and a terrible jacket.

It can have a great jacket and poorly designed shielding.

It can have excellent cable construction and connectors that weren't designed for repeated mating cycles or field abuse.

A good tactical cable has to work as a complete system.

Stranded cable does have tradeoffs

Stranded conductors aren't automatically better for every application.

Compared with an equivalent solid conductor, stranded cable generally has slightly higher electrical resistance because the current is traveling through multiple smaller conductors.

That becomes increasingly important over long distances.

It is one of the reasons conductor gauge matters.

A very thin stranded conductor may create a cable that feels incredibly flexible in your hand, but flexibility alone doesn't make a good tactical network cable. You still need enough copper to maintain the electrical performance required over practical production distances.

That's part of why we chose 24 AWG for TRUFLEX.

The goal wasn't to make the thinnest or softest cable possible.

It was to find the right balance between flexibility, durability, conductor size, shielding, and network performance.

Cable construction should match the application

There is nothing wrong with solid copper cable.

It's simply built for a different job.

If we're wiring a permanent network rack, we'd choose cable designed for that environment.

If we're building cable that is going into road cases, across stages, through arenas, and onto production carts, we design around that environment instead.

That means looking beyond the category printed on the jacket.

For tactical Ethernet cable, we care about:

  • Stranded conductor construction for repeated flexing
  • Proper conductor gauge for electrical performance over distance
  • Shielding for electrically noisy production environments
  • A flexible, abrasion-resistant jacket for repeated deployment
  • Touring-grade connectors that can survive constant handling

None of those decisions exists in isolation.

Stranded copper is simply where the durability of the cable starts.

Built for the way production cable is actually used

When we developed TRUFLEX, the question wasn't just whether the cable could meet a specification on a test bench.

The question was what happens after it has been coiled, deployed, stepped on, packed into a case, transported, and deployed again hundreds of times.

That's the difference between cable designed for an installation and cable designed for production.

For something that spends its life sitting inside a wall, solid copper is a great solution.

For something that gets thrown on a stage every night, we'll take stranded copper every time.